dmesg - t601 frankenpad
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-106-generic (buildd@lcy01-25) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #153-Ubuntu SMP Tue Dec 6 15:45:13 UTC 2016 (Ubuntu 3.13.0-106.153-generic 3.13.11-ckt39)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf6affff] usable
BIOS-e820: [mem 0x00000000bf6b0000-0x00000000bf6cbfff] ACPI data
BIOS-e820: [mem 0x00000000bf6cc000-0x00000000bf6fffff] ACPI NVS
BIOS-e820: [mem 0x00000000bf700000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: LENOVO 8896W4V/8896W4V, BIOS 7LETC9WW (2.29 ) 03/18/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x13c000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0C0000000 mask FC0000000 uncachable
1 base 13C000000 mask FFC000000 uncachable
2 base 000000000 mask F00000000 write-back
3 base 100000000 mask FC0000000 write-back
4 base 0BF700000 mask FFFF00000 uncachable
5 base 0BF800000 mask FFF800000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 3GB, range: 1GB, type UC
reg 1, base: 5056MB, range: 64MB, type UC
reg 2, base: 0GB, range: 4GB, type WB
reg 3, base: 4GB, range: 1GB, type WB
reg 4, base: 3063MB, range: 1MB, type UC
reg 5, base: 3064MB, range: 8MB, type UC
total RAM covered: 4023M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3063MB, range: 1MB, type UC
reg 3, base: 3064MB, range: 8MB, type UC
reg 4, base: 4GB, range: 1GB, type WB
reg 5, base: 5056MB, range: 64MB, type UC
e820: update [mem 0xbf700000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000f68f0-0x000f68ff] mapped at [c00f68f0]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01ba6000, 0x01ba6fff] PGTABLE
RAMDISK: [mem 0x35916000-0x36c82fff]
ACPI: RSDP 000f68c0 000024 (v02 LENOVO)
ACPI: XSDT bf6bb496 00009C (v01 LENOVO TP-7U 00002290 LTP 00000000)
ACPI: FACP bf6bb600 0000F4 (v03 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20131115/tbfadt-572)
ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20131115/tbfadt-603)
ACPI: DSDT bf6bba1d 01003C (v01 LENOVO TP-7U 00002290 MSFT 03000000)
ACPI: FACS bf6e4000 000040
ACPI: SSDT bf6bb7b4 000269 (v01 LENOVO TP-7U 00002290 MSFT 03000000)
ACPI: ECDT bf6cba59 000052 (v01 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI: TCPA bf6cbaab 000032 (v02 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI: APIC bf6cbadd 000068 (v01 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI: MCFG bf6cbb45 00003C (v01 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI: HPET bf6cbb81 000038 (v01 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI: SLIC bf6cbbb9 000176 (v01 LENOVO TP-7U 00002290 LTP 00000000)
ACPI: SLAC bf6cbdf0 000176 (v01 LENOVO TP-7U 00002290 LTP 00000000)
ACPI: BOOT bf6cbf66 000028 (v01 LENOVO TP-7U 00002290 LTP 00000001)
ACPI: ASF! bf6cbf8e 000072 (v16 LENOVO TP-7U 00002290 PTL 00000001)
ACPI: SSDT bf6e271b 00025F (v01 LENOVO TP-7U 00002290 INTL 20050513)
ACPI: SSDT bf6e297a 0000A6 (v01 LENOVO TP-7U 00002290 INTL 20050513)
ACPI: SSDT bf6e2a20 0004F7 (v01 LENOVO TP-7U 00002290 INTL 20050513)
ACPI: SSDT bf6e2f17 0001D8 (v01 LENOVO TP-7U 00002290 INTL 20050513)
ACPI: DMI detected: Lenovo ThinkPad T61
ACPI: Local APIC address 0xfee00000
4164MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01ba7000, 0x01ba7fff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x3bffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xbf6affff]
node 0: [mem 0x00000000-0x3bffffff]
On node 0 totalpages: 1029708
free_area_init_node: node 0, pgdat c19ab980, node_mem_map f3196020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3996 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 8329 pages used for memmap
HighMem zone: 801458 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0xc0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bd0000 s35520 r0 d21824 u57344
pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1027924
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 10354680 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0013c000)
Memory: 4035384K/4118832K available (6587K kernel code, 642K rwdata, 2780K rodata, 884K init, 924K bss, 83448K reserved, 3205832K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc19c9000 - 0xc1aa6000 ( 884 kB)
.data : 0xc166f20a - 0xc19c8900 (3429 kB)
.text : 0xc1000000 - 0xc166f20a (6588 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f2c08000 soft=f2c0a000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2593.507 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.01 BogoMIPS (lpj=10374028)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (c1aa6000 - c1aae000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27949 entries in 55 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz (fam: 06, model: 17, stepping: 06)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f2d12000 soft=f2d14000
x86: Booting SMP configuration:
Initializing CPU#1
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 477490 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (10374.02 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbf6cc000-0xbf6fffff] (212992 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 10:28:30, date: 02/15/17
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux)
ACPI : EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
ACPI: SSDT bf6e1b32 000306 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000306 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT bf6e1ebd 00085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: SSDT bf6e1a6a 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT bf6e1e38 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf8100000-0xf81fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xf8200000-0xf82fffff 64bit]
pci 0000:00:19.0: [8086:1049] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfe000000-0xfe01ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfe025000-0xfe025fff]
pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x1860-0x187f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x1880-0x189f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfe226c00-0xfe226fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfe020000-0xfe023fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x18a0-0x18bf]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x18c0-0x18df]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x18e0-0x18ff]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfe227000-0xfe2273ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2811] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io 0x1c00-0x1c0f]
pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x1c50-0x1c57]
pci 0000:00:1f.2: reg 0x14: [io 0x1c44-0x1c47]
pci 0000:00:1f.2: reg 0x18: [io 0x1c48-0x1c4f]
pci 0000:00:1f.2: reg 0x1c: [io 0x1c40-0x1c43]
pci 0000:00:1f.2: reg 0x20: [io 0x1c20-0x1c3f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfe226000-0xfe2267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfe227400-0xfe2274ff]
pci 0000:00:1f.3: reg 0x20: [io 0x1c60-0x1c7f]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:03:00.0: [8086:4230] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xdf3fe000-0xdf3fffff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff]
pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff]
pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff]
pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref]
pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
pci 0000:15:00.0: reg 0x10: [mem 0xf8300000-0xf8300fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x7000-0xafff]
pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed4bfff] (subtractive decode)
pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
pci_bus 0000:00: on NUMA node 0
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf6b0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: [io 0x1000-0x107f] could not be reserved
system 00:01: [io 0x1180-0x11bf] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x165f] could not be reserved
system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
pnp 00:09: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff]
pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff]
pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff]
pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref]
pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref]
pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff]
pci 0000:15:00.0: BAR 13: assigned [io 0x7000-0x70ff]
pci 0000:15:00.0: BAR 14: assigned [io 0x7400-0x74ff]
pci 0000:15:00.0: CardBus bridge to [bus 16-17]
pci 0000:15:00.0: bridge window [io 0x7000-0x70ff]
pci 0000:15:00.0: bridge window [io 0x7400-0x74ff]
pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 15-18]
pci 0000:00:1e.0: bridge window [io 0x7000-0xafff]
pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff]
pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xdc000000-0xdf3fffff]
pci_bus 0000:03: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff]
pci_bus 0000:04: resource 2 [mem 0xdfb00000-0xdfbfffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd5ffffff]
pci_bus 0000:05: resource 2 [mem 0xdf800000-0xdf8fffff 64bit pref]
pci_bus 0000:0d: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:0d: resource 1 [mem 0xd0000000-0xd1ffffff]
pci_bus 0000:0d: resource 2 [mem 0xdf500000-0xdf5fffff 64bit pref]
pci_bus 0000:15: resource 0 [io 0x7000-0xafff]
pci_bus 0000:15: resource 1 [mem 0xf8300000-0xfbffffff]
pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:15: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:15: resource 10 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:15: resource 11 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:16: resource 0 [io 0x7000-0x70ff]
pci_bus 0000:16: resource 1 [io 0x7400-0x74ff]
pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref]
pci_bus 0000:16: resource 3 [mem 0xc0000000-0xc3ffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS mismatch (64 != 32), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19892K (f5916000 - f6c83000)
Simple Boot Flag at 0x35 set to 0x1
microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60f
microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60f
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1487154510.568:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1659
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: Using ACPI for slot detection.
pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2845 ss_vid 17aa ss_did 20ad
pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xf8480000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
ipmi message handler version 39.2
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (50 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (45 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
tpm_tis 00:09: 1.2 TPM (device-id 0x3203, rev-id 9)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
tpm_tis 00:09: TPM is disabled/deactivated (0x6)
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 22, io mem 0xfe226c00
ata2: port disabled--ignoring
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-106-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 19, io mem 0xfe227000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-106-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-106-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-106-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-106-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-106-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-106-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 358f00514aee9de696bcb1fecfe99839a5c67820'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
tpm_tis 00:09: A TPM error (6) occurred attempting to read a pcr value
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 5:88:477
rtc_cmos 00:06: setting system clock to 2017-02-15 10:28:32 UTC (1487154512)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
isapnp: No Plug & Play device found
Freeing unused kernel memory: 884K (c19c9000 - c1aa6000)
Write protecting the kernel text: 6592k
Write protecting the kernel read-only data: 2784k
NX-protecting the kernel data: 5696k
systemd-udevd[102]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:25:12:de:bf
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 46
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 46
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ATA-8: INTEL SSDSA2BW160G3L, 4PC1LE04, max UDMA/133
ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSA2BW16 4PC1 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 > sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0, board id: 0, fw id: 67352
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
usb 3-1: new full-speed USB device number 2 using uhci_hcd
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: BCM2045B
usb 3-1: Manufacturer: Broadcom Corp
usb 3-2: new full-speed USB device number 3 using uhci_hcd
usb 3-2: New USB device found, idVendor=0483, idProduct=2016
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Biometric Coprocessor
usb 3-2: Manufacturer: STMicroelectronics
psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 76 bits of entropy available
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6
init: plymouth-upstart-bridge main process (162) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (172) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (175) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (177) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (179) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 3379196k swap on /dev/sda4. Priority:-1 extents:1 across:3379196k SSFS
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd-udevd[301]: starting version 204
lp: driver loaded but no devices found
thinkpad_ec: module verification failed: signature and/or required key missing - tainting kernel
thinkpad_ec: thinkpad_ec 0.41 loaded.
tp_smapi 0.41 loading...
tp_smapi successfully loaded (smapi_port=0xb2).
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
systemd-udevd[350]: renamed network interface eth0 to eth1
random: nonblocking pool is initialized
cfg80211: Calling CRDA to update world regulatory domain
[drm] Memory usable by graphics device = 512M
checking generic (e0000000 500000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
pci 0000:00:1e.0: enabling device (0005 -> 0007)
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c4]
i915 0000:00:02.0: irq 47 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
type=1400 audit(1487154519.177:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=465 comm="apparmor_parser"
type=1400 audit(1487154519.177:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=465 comm="apparmor_parser"
type=1400 audit(1487154519.177:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=465 comm="apparmor_parser"
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000006
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x7000-0xafff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0xafff:
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1487154519.433:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=553 comm="apparmor_parser"
type=1400 audit(1487154519.433:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=553 comm="apparmor_parser"
init: cups main process (562) killed by HUP signal
init: cups main process ended, respawning
iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
iwl4965: Copyright(c) 2003-2011 Intel Corporation
iwl4965 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5
iwl4965 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
iwl4965 0000:03:00.0: irq 48 for MSI/MSI-X
usbcore: registered new interface driver btusb
iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24
ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS 7LETC9WW (2.29 ), EC 7KHT24WW-1.08
thinkpad_acpi: Lenovo ThinkPad T61, model 8896W4V
thinkpad_acpi: detected a 16-level brightness capable ThinkPad
excluding 0x7000-0x70ff 0x7400-0x74ff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf8300000-0xfbffffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8300000-0xfbffffff:
excluding 0xf8300000-0xf86cffff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xf7ffffff 64bit pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4000000-0xf7ffffff:
excluding 0xf4000000-0xf7ffffff
thinkpad_acpi: ACPI backlight control delay disabled
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
init: failsafe main process (651) killed by TERM signal
systemd-udevd[350]: renamed network interface wlan0 to wlan1
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[drm] initialized overlay support
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
excluding 0x3f0-0x3f7 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xd3fff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
init: samba-ad-dc main process (763) terminated with status 1
clean.
fbcon: inteldrmfb (fb0) is primary device
type=1400 audit(1487154520.313:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=856 comm="apparmor_parser"
type=1400 audit(1487154520.313:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=856 comm="apparmor_parser"
type=1400 audit(1487154520.313:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=856 comm="apparmor_parser"
type=1400 audit(1487154520.317:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=855 comm="apparmor_parser"
type=1400 audit(1487154520.317:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=855 comm="apparmor_parser"
Console: switching to colour frame buffer device 175x65
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
acpi device:02: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
autoconfig: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1b/0x0
inputs:
Internal Mic=0x15
Dock Mic=0x1c
Mic=0x14
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
smapi smapi: set_real_thresh: set start to 41 for bat=0
init: plymouth-upstart-bridge main process ended, respawning
smapi smapi: set_real_thresh: set stop to 56 for bat=0
vboxdrv: Found 2 processor cores
vboxdrv: fAsync=1 offMin=0x7475e offMax=0x7475e
vboxdrv: TSC mode is Asynchronous, tentative frequency 2593511243 Hz
vboxdrv: Successfully loaded version 5.0.32 (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (1476) terminated with status 1
audit_printk_skb: 33 callbacks suppressed
type=1400 audit(1487154549.525:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2115 comm="apparmor_parser"
type=1400 audit(1487154549.525:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2115 comm="apparmor_parser"
systemd-hostnamed[2193]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
wlan1: authenticate with 00:0b:6b:3a:7f:3d
wlan1: send auth to 00:0b:6b:3a:7f:3d (try 1/3)
wlan1: authenticated
iwl4965 0000:03:00.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
iwl4965 0000:03:00.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 00:0b:6b:3a:7f:3d (try 1/3)
wlan1: RX AssocResp from 00:0b:6b:3a:7f:3d (capab=0x411 status=0 aid=4)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
perf samples too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000